GROMIT AND BLANKING KIT FOR SV1000S/N K3 TO K5

Although I was trying to buy something of the shelf to just pop in to the swingarm nut recesses it proved impossible to do and both sides are different sizes. So I had to have them precision CNC machined using Acetal, very much like the material the mirror spacers are made from and a very similar finish. I am working on batches of 50 pairs to start with and I expect them to go out fast judging how many PMs I have had asking about progress. The kit will have 11 other grommets to fit the footrest hangers and one for the right hand side of the frame and two for the clocks area. They all fit like a glove and are simple to remove should you want to use an ABBA stand. The two in the pivot points have two little cut outs at the back to allow you to pop them out using a 10mm screwdriver blade.

The two shown in the photo below are the proto types so the finished items will be a much better finish than shown.

Sales/orders:  www.chewys-stuff.co.uk

The kit: 2 x swingarm pivot nut covers 2 x fairing headlamp adjuster hole grommets 4 x Pillion footrest/exhaust hanger mount grommets 4 x Rider footpeg mount grommets

www.chewys-stuff.co.uk

Top